DAC300

The converter DAC300 has been implemented to offer you the best of your favourite music. The combination of the SABRE ES9038PRO converter, renowned for its musicality, and the feedback-free audio stages designed specifically by our design office, make this device the flagship of the converter range. The secret: the analogue signal processing stages, the power supplies (transformers, filtering, regulation), the digital signal processing before conversion, and the quality of the key components: clocks, transistors, capacitors, etc.

  • 8 mm brushed aluminium front.
  • 3 independent very low noise linear transformers (including 2 reserved for the audio line).
  • SABRE ES9038PRO converter (32 bits/768 kHz):
             – Dynamic: 137 dB.
             – THD at 1 kHz (0 dBF): -122 dB.
             – Signal/Noise ratio: 132 dB.
  • SABRE ES9311EQ power supply with very low noise (<1 μVrms).
  • Separate digital and stage line power supplies.
  • Ultra-high precision low jitter clock.
  • Asynchronous USB-B input can convert PCM up to 768 kHz and DSD64, 128, 256 and 512 (XMOS USB interface with a specific program designed for ATOLL).
  • Volume management by disengageable converter
    (BY-PASS ON or OFF).
  • Unbalanced and balanced output lines.
  • 12 independent voltage regulations.
  • Symmetrical power supply of the audio output stages (low noise transformers).
  • ESA series CLARITY CAP audio MKP link capacitors.
  • High-frequency capacitors with silver mica technology.
  • Output stages with discrete components, without feedback, polarized in class A.
  • Specific transformer for digital stages.
  • Standard ATOLL global remote control.

Type of files read:

S/PDIF inputs can support PCM up to 192 kHz.
USB-B can convert PCM up to 768 kHz and DSD64, 128, 256 and 512.
(This performance may vary depending on the software or operating systems of the USB source).

CONNECTIVITY

9 Digital Inputs
3 Coaxial.
3 Toslink optics.
1 AES/EBU.
1 Bluetooth®.
1 USB-B.

2 Digital Outputs
1 Coaxial and 1 optical.

3 Digital Outputs
1 Stereo unbalanced RCA.
1 Balanced stereo XLR.
1 Headphone jack Ø 3.5 mm.

View the standard for XLR connector wiring.

TECHNICAL DATA

Power supply: 2×10 VA + 10 VA
Total of capacitors: 20,030 μF
Frequency response: 5 Hz – 20 kHz
Converter: ES9038PRO
Dynamic: 137 dB
THD at 1 kHz (0 dBF): -122 dB
Signal-to-noise ratio: 132 dB
Output level: Maximum line: 2,25 Vrms
Output level: Maximum XLR: 2,25 Vrms
Dimensions: 440×308×63 mm
Weight: 5 kg

XMOS SPECIFIC DRIVER

Important: using the USB input of the optional DAC card requires downloading a specific driver for Windows computers. This can be downloaded below. This driver is not necessary under MAC and Linux.

Download it here:

XMOS-Stereo-USB-Audio-Class2-Driver-30BB_v4.13.0.exe

The remote control is supplied as standard and allows:

  • Input selection.
  • Volume control.

It allows you to remotely control the following ATOLL products: Integrated, Preamps, CD Players, Tuners, DACs.

“What the DAC300 lets guess, it offers without detour, by the subtle and successful balance between the never aggressive sense of detail, an omnipresent, almost analog tonal richness and a dynamic alacrity always on the alert without overdoing it, leaving the quality sources to express themselves. It is ultimately 100% at the service of musical realism in its proper dimension. Atoll displays its stature here, where the DAC is the heart of a digital system which can be completed with a network player from the brand and/or a good CD drive. Atoll stays in the big leagues with its DAC300.”

Bruno Castelluzzo, Haute Fidélité magazine, N°238, April-May 2019

The DAC300 is available in black or natural aluminum version:

Black anodized brushed aluminum finish.
Silver anodized brushed aluminum finish.